RIDGID 120V Spécifications télécharger pdf (Page 59)

Ripping

Definition: Cutting operation along the

length of the workpiece.

Position the fence to the desired width of

rip and lock in place.

Before starting to rip, be sure:

1. Rip fence is parallel to sawblade.

2. Spreader is properly aligned with saw-

blade.

3. Anti-kickback pawls are functioning

properly.

When ripping long boards or large panels,

always use a work support. A simple sup-

port can be made by clamping a piece of

plywood to a sawhorse.

WARNING: To reduce the risk of

kickback, push forward only on

the part of the workpiece that

will pass between the blade and

the fence.

Keep your hands out of the blade path.

Feed the workpiece by pushing forward

only on the part of the workpiece that will

pass between the blade and the fence.

Stop your left thumb at the front edge of

the table. Finish the cut with the appropri-

ate pusher.

Once the trailing end is on the table:

When “width of rip” is 2” or wider, use the

push stick to finish the work all the way

past the blade.

Blade

Path

Feed

Force

Push Stick

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 83 84

Pas de commentaire

RIDGID 120V Spécifications Page 59