RIDGID K-2000 Spécifications Page 9

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 20
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 8
9
Mounting Inlet Bracket
1. From the loose parts bag find the following:
4 Hex Screws, M8 x 1.25-12
4 Flat washers, 5/16 x 11/16 x 1/16)
2 Hex Screw M6 x 1-12
2 Flat washers 1/4 x 1/2
2. Insert inlet bracket between relief flange of inlet guard
and against inside edge of angle flange on support leg.
Make sure both holes on bracket align with similar
holes on leg support.
3. Place 5/16 flat washer on hex screw, insert through leg
hole and attach to threaded hole of bracket.
4. Repeat same process for other hole and secure with
use of adjustable wrench.
5. Attach fixed clamp as shown, by placing flat washer on
hex screw, insert hex screw through hole of fixed
clamp and attach to threaded hole of inlet guard
bracket.
6. Repeat step 5 to attach other screw below inlet guard.
7. Tighten all screws on legs, inlet guard and filtration
housing securely.
Mounting Base Plate
1. From the loose parts bag find the following items:
4 Hex Screws M8 x 1.25-12
4 Flat Washers 5/16 x 11/16 x 1/16
2. Attach base plate to leg supports by flipping base
upside down, aligning holes on both leg supports.
3. Place 5/16 flat washer on hex screw, insert through leg
hole and attach to threaded hole of base plate as
shown.
4. Repeat same process for other three holes and secure
with use of adjustable wrench.
5. With the assistance of another person, carefully flip the
dust collection system right side up.
Flat Washer
1/4 x 1/2
Hex Head Screw
M8 x 1.25-12
Flat Washer
5/16 x 11/16 x 1/16
Hex Head Screw
M6 x 1-12
Clamp and Bracket
Mount Here
Inlet Guard
Clamp
Bracket
Leg Support
Hex Head Screw
M8 x 1.25-12
Flat Washer
5/16 x 11/16 x 1/16
Fixed Casters
Base Plate
Swivel Casters
Flat Washer
Hex Screw
Leg Support
Leg
Support
Vue de la page 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Commentaires sur ces manuels

Pas de commentaire