RIDGID K-2000 Spécifications télécharger pdf (Page 7)

Assembly

Mounting Front Pivoting Casters

1. From the loose parts bag find the following:

2 Hex Nuts, 3/8-16

4 Flat Washers, 3/8 x 3/4

2 Acorn Nuts 3/8-16

2 Pivoting Casters

2. Find the following:

1 Base Plate

3. Screw a hex nut completely onto the caster bolt.

4. Position flat washer on top of previously installed hex

nut and slip the caster bolt through the hole on front of

base plate. Position second flat washer on the bolt.

5. Screw the acorn nut on the bolt securely with an

adjustable wrench.

6. Tighten the hex nut securely against the base plate.

7. Repeat steps 2-5 on opposite sides.

Mounting Rear Fixed Casters

1. From the loose parts bag find the following:

4 Hex Head Screws, M6 x 1-12

4 Lockwashers, 1/4

4 Flat Washers, 1/4 x 1/2

2 Fixed Casters

2. Position fixed caster under rear of base plate so that

holes on caster bracket and base plate line up.

3. Install hex screw, lockwasher, and flat washer as

shown. Tighten securely suing an adjustable wrench.

4. Repeat steps 2 and 3 on opposite sides.

Acorn Nut

Flat Washer

Hex nut

Swivel

Caster Bolt

Base Plate

(Front)

Swivel Caster

Hex Head Screw

M6 x 1-12

Flat Washers

1/4 x 1/2

Fixed

Caster

Lockwashers

1/4

Base Plate

(Rear)

Hex Screw

Lockwasher

Flat Washer

Fixed Caster

Hex Nuts

3/8-16

Flat Washers

3/8 x 3/4

Acorn Nut

Pivoting

Caster

Base Plate

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

RIDGID K-2000 Spécifications Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Filtres à air RIDGID K-2000